Men's Style
  • News
  • Cars
  • Travel
  • Business
  • Sport
  • Tips
  • Jobs
Men's Style – stylish and beautiful portal about life Men's Style – stylish and beautiful portal about life
Men's Style – stylish and beautiful portal about life
  • News
  • Cars
  • Travel
  • Business
  • Sport
  • Tips
  • Jobs

Production of aerated concrete blocks using equipment for small businesses

  • December 10, 2018

Despite the crisis, housing construction does not stop, but continues to develop. Therefore, the demand for building materials also invariably remains at a high level. Today, aerated concrete building blocks are particularly popular. Experts note that the production of wall blocks from aerated concrete has always been and remains quite profitable. Therefore, if you want to open your own business, then you should pay attention to the manufacture of wall blocks. In addition, the production process is quite simple and practically no special skills will be required.

Equipment for small and medium -sized businesses can be purchased in specialized firms engaged in its supply. You can place such equipment in any room. If you do not have one yet, then you can temporarily get it under a canopy.

The technology for the production of blocks from aerated concrete, as noted earlier, is quite simple. All components (sand, cement, additives, aluminum powder and water) are mixed in the mixture-aciator. The solution obtained in this way is poured into a special form in which this mixture lifts. After set of initial strength, the array is cut into separate blocks, and then left to make the blocks gain the final strength. The manufacturing period depends on the temperature in the room. Usually after 8-14 hours finished blocks can be removed from the forms and folded on pallets.

So, in the classic version, the equipment used for the manufacture of wall blocks is a mixer-activator and special forms. Modern equipment makes it possible to establish the production of aerated concrete blocks in a short time.

Share
Tweet
Pin it
Share
Share
You May Also Like
View Post

Tulum for ecotourists: advantages and attractions

  • February 26, 2025
View Post

Vacation in Mexico City: what to see and the best attractions

  • February 26, 2025
View Post

Three best places in China for travelers

  • February 26, 2025
View Post

Multi-factor authentication: concept and its features

  • February 26, 2025
View Post

Why it is important to set strong passwords on the Internet

  • February 26, 2025
View Post

What is a reliable internet connection and its advantages

  • February 26, 2025
View Post

Doncic equals LeBron and Westbrook’s record

  • February 26, 2025
View Post

MLS fines Messi and Suarez for offensive conduct

  • February 26, 2025
Featured Posts
  • Often, those people who live in a private house or have a cottage are faced with the next problem – a blind area. It cracks, crumbles or lags behind the foundation of the house. In addition to technical problems, this still spoils the appearance of the house and reduces its cost if you decide to put it up for sale. Therefore, in our note, we will give you some tips on how to cope with this misfortune and carry out repair of the blind area with your own hands. Actually, the blind area of ​​the foundation serves so that rainwater does not fall from the roof under the foundation of the house during the rain and does not erode it. There are many drainage systems, but the blind area plays far from the last role, being a fairly simple and effective means of protecting the foundation from excessive moisture. If you notice that the blind area is damaged, do not be upset or panic. Such minor repairs are made quite by yourself. First you need to use a hammer and a chisel to remove the damaged part, pulling out broken pieces. Sometimes a blind area can just sneak. In this case, it is necessary to compact the soil in this place. Bled bricks, crushed stone, gravel, sand serve as good material for compaction. After the selected material is poured, you need to pour it with concrete and leve it. When pouring concrete, it is necessary to ensure that it is distributed evenly and coincide with the places of the blind area, which were not repaired. If the blind area did not sag and did not break, but simply went with cracks, it will be enough to close them, without changing the damaged part completely in order to prevent water from entering. For this, a polymer -cement mortar is used. It turns out when mixing PVA glue with cement mortar. Such a solution is very strong and waterproof. After shallowing cracks, it is also necessary to treat with bitumen mastic a place where the wall of the house is connected to the blind area. In the event that the overhaul of the blind area is required, all small damage is connected to the whole repair area and cut down. After that, it is necessary to add a scatter or crushed stone into the resulting pits, flatter and concrete. With this version of the repair, a new layer of concrete should rise above the old level of the blind area. This will provide a reliable and strong connection of the new and old blind. The repair of the blind area is best carried out in spring or summer on a cool day. With the heat and heating of the surface, the slot of the slit can decrease, which will prevent them from high quality
    • January 21, 2025
  • Types of everyday life, their purpose
    • December 27, 2024
  • Brick – reliable modern material
    • July 5, 2018
  • The choice of flooring in the living room and bedroom
    • January 16, 2025
  • Tiles in a wooden house – secrets and tricks of installation
    • October 31, 2018
Recent Posts
  • Tulum for ecotourists: advantages and attractions
    • February 26, 2025
  • Vacation in Mexico City: what to see and the best attractions
    • February 26, 2025
  • Three best places in China for travelers
    • February 26, 2025
Men's Style – stylish and beautiful portal about life Men's Style – stylish and beautiful portal about life
  • Men’s Style – newmensstyle.com, 2017-2024. All Right Reserved.

Input your search keywords and press Enter.