Men's Style
  • News
  • Cars
  • Travel
  • Business
  • Sport
  • Tips
  • Jobs
Men's Style – stylish and beautiful portal about life Men's Style – stylish and beautiful portal about life
Men's Style – stylish and beautiful portal about life
  • News
  • Cars
  • Travel
  • Business
  • Sport
  • Tips
  • Jobs

Used materials for decoration of facades

  • November 30, 2018

The construction was completed, the walls of the floor and the roof were erected, and then what? Next, you need to start decorating the house. And here you need to carefully choose materials for the decoration of the facades. Each of the options of finishing material presented in the construction market has both advantages and disadvantages. The choice of one or another option is determined by many factors and the desires of the owner of the building, which has to go through the external decoration procedure. A very important point is what the walls of the house are made of, not every decoration option can be implemented on wooden walls due to their features and susceptibility to moisture.

The most common option for external decoration is siding and facade panels. These materials for the decoration of facades are quite cheap, easy and reliable. Their installation period is only a few days, and is made quite easily. These materials belong to the category of ventilated facades and are able to provide additional thermal insulation of the room. Each of the options for facade finishes belongs to non -combustible materials, has a large selection of color solutions, resistant to atmospheric precipitation and temperature changes, retains color in the original version for many years, does not swell and does not peel off.

Other materials for the decoration of facades

In addition to the above materials, there are also other materials for the decoration of the facades. For example, this is a brick familiar to most consumers, stone and plaster. The facade of the building is laid out with brick in order to ennoble its appearance when using cheaper building materials or for the cosmetic repair of buildings for more than a dozen years. Sometimes they resort to the option when only the bottom of the building is made of brick, and the rest of the facade is finished with plaster. Moreover, to create a unique facade, it is not rare to add dyes to the plaster solution and receive interesting color solutions.

No less popular is the use of stone. If a natural stone is a natural material with all the advantages that follow from here, then the artificial stone is its cheaper copy. Yes, the finish of the house with the help of stone is a truly incredible sight. But in order to use natural stone, you need to specially enhance the design of the building, since the weight of the stone is quite impressive, which means that you will have to invest additional means. There is no such problem with an artificial stone. It is quite light and does not require special skills in installing. It resembles ceramic tiles and is outwardly very beautiful.

Share
Tweet
Pin it
Share
Share
You May Also Like
View Post

Tulum for ecotourists: advantages and attractions

  • February 26, 2025
View Post

Vacation in Mexico City: what to see and the best attractions

  • February 26, 2025
View Post

Three best places in China for travelers

  • February 26, 2025
View Post

Multi-factor authentication: concept and its features

  • February 26, 2025
View Post

Why it is important to set strong passwords on the Internet

  • February 26, 2025
View Post

What is a reliable internet connection and its advantages

  • February 26, 2025
View Post

Doncic equals LeBron and Westbrook’s record

  • February 26, 2025
View Post

MLS fines Messi and Suarez for offensive conduct

  • February 26, 2025
Featured Posts
  • How to warm a brick house from the inside
    • June 15, 2018
  • Often, those people who live in a private house or have a cottage are faced with the next problem – a blind area. It cracks, crumbles or lags behind the foundation of the house. In addition to technical problems, this still spoils the appearance of the house and reduces its cost if you decide to put it up for sale. Therefore, in our note, we will give you some tips on how to cope with this misfortune and carry out repair of the blind area with your own hands. Actually, the blind area of ​​the foundation serves so that rainwater does not fall from the roof under the foundation of the house during the rain and does not erode it. There are many drainage systems, but the blind area plays far from the last role, being a fairly simple and effective means of protecting the foundation from excessive moisture. If you notice that the blind area is damaged, do not be upset or panic. Such minor repairs are made quite by yourself. First you need to use a hammer and a chisel to remove the damaged part, pulling out broken pieces. Sometimes a blind area can just sneak. In this case, it is necessary to compact the soil in this place. Bled bricks, crushed stone, gravel, sand serve as good material for compaction. After the selected material is poured, you need to pour it with concrete and leve it. When pouring concrete, it is necessary to ensure that it is distributed evenly and coincide with the places of the blind area, which were not repaired. If the blind area did not sag and did not break, but simply went with cracks, it will be enough to close them, without changing the damaged part completely in order to prevent water from entering. For this, a polymer -cement mortar is used. It turns out when mixing PVA glue with cement mortar. Such a solution is very strong and waterproof. After shallowing cracks, it is also necessary to treat with bitumen mastic a place where the wall of the house is connected to the blind area. In the event that the overhaul of the blind area is required, all small damage is connected to the whole repair area and cut down. After that, it is necessary to add a scatter or crushed stone into the resulting pits, flatter and concrete. With this version of the repair, a new layer of concrete should rise above the old level of the blind area. This will provide a reliable and strong connection of the new and old blind. The repair of the blind area is best carried out in spring or summer on a cool day. With the heat and heating of the surface, the slot of the slit can decrease, which will prevent them from high quality
    • January 21, 2025
  • Methods of removing wallpaper from the walls to glue new wallpaper if the old ones are not removed, it is impossible. But in order to get rid of the previously glued material, sometimes quite serious efforts are required. To simplify this process in a maximum way, you should understand how it can be carried out. There are many methods of getting rid of wallpaper. But to choose from them sometimes is very difficult.1. Dry wallpaper removal method. Well, if he “works”. But usually still this option cannot be implemented. And even if it gives the result, certain problems still appear. The essence of the dry method is that the wallpaper simply sharsen the spatula and rip off from the wall. If you managed to do this, you have to observe glue on the wall. It also has to be deleted. But now for this they use a wet rag. When multi -layer wallpaper is removed, it is done one at one layer. If it is impossible to remove the material in a dry way, turn to the next.2. Wet method of wallpaper removal. Previously, the wallpaper has to be wetted. To do this, you can use a roller or rag. Water should be slightly warm. Before tearing the canvases from the surface, you should wait until they are saturated. Impregnation lasts a few minutes. This method involves removing not only wallpaper, but also glue. When you need to remove moisture -resistant wallpaper, first resort to the previously described method. That is, the upper layer of the material is removed, then it is wetting the wallpaper, and only after that – the removal of the main layer.3. Removing wallpaper after steaming. This is another method that is used if the wallpaper is glued using very well -granting glue. Wallpaper can be steamed using different “tools”. The most affordable of them is the iron. Naturally, only such an iron that is equipped with a special steamer can be used. There are also special types of tools designed to carry out such work. In any case, their purpose is to make the wallpaper glue soft and supple. Most often, the glue under wallpaper has to be removed in addition after removing the wallpaper. These methods are listed in an increase in efficiency. Therefore, in order not to perform unnecessary labor -cost actions, they should be implemented in this order. If a certain method does not give a result, they proceed to the next
    • August 24, 2018
  • Choosing finishing materials for window sills
    • January 15, 2025
  • The first element of the “table” of the roofer
    • October 19, 2018
Recent Posts
  • Tulum for ecotourists: advantages and attractions
    • February 26, 2025
  • Vacation in Mexico City: what to see and the best attractions
    • February 26, 2025
  • Three best places in China for travelers
    • February 26, 2025
Men's Style – stylish and beautiful portal about life Men's Style – stylish and beautiful portal about life
  • Men’s Style – newmensstyle.com, 2017-2024. All Right Reserved.

Input your search keywords and press Enter.