Stretch ceilings are very popular due to the fact that they differ in their amenities during operation, as well as their low cost. The birthplace of such material is considered to be France. It is interesting that the stretch ceilings in Switzerland were invented back in the middle of the 20th century. This technology received this technology in France. As for our time that in Russia, stretch ceilings began to be used only in the late 90s.
How can you explain the fact that the ceiling of the tension does not accumulate dust?
The stretch ceiling has a number of its significant advantages, compared to the usual plastered ceiling, a suspended ceiling and a drywall ceiling. During its operation, the stretch ceiling can be easily washed, dust will not stick to it. And this is achieved due to the fact that the film will not accumulate static electricity, which helps attract dust to the surface.
Where to find realistic photos of suspended ceilings in different interiors?
By contacting a repair company, you can order them to install stretch ceilings. On the official sites of such companies you can find the information you are interested in. In the event that you do not want to pay for the services of professionals, then you can perform the installation of the tensioning ceilings with your own hands. And you can do this competently if you get acquainted in advance with the features of the implementation of this process. In addition, you will need to take care of the acquisition of all the necessary tool.
Features of installing a stretch ceiling
The installation of a film stretch ceiling must be done after the room is warmed up. And this must be done using a heat gun, which will warm the room to a temperature of 40 degrees. Remember that you can not unwind the tent film next to the heat gun. To fix the film you need to start from the corner, which is the base angle. It is marked on the film. It is important to heat the film to a temperature of not more than 65 degrees. After fixing the base angle, you should proceed with the fastening of the opposite diagonal of the angle. Excess after the end of the installation of the tension material must be cut off.