Wood floor coverings have been known for a very long time and are still very popular. The advantages of such a coating are environmental friendliness, hygiene, low sound permeability and thermal conductivity. There are various types of floor wooden coatings:
Description of the article:
• File parquet simple. This type of floor covering differs the same thickness of all elements. Its feature is a limited temperature range. In addition, it requires that in the room a normal level of humidity. With increased dryness with parquet, changes can occur, leading to deformations. Problems with laying, as a rule, do not arise. The material is laid on the plywood or concrete base. Plywood can be stacked on concrete (plywood sheets should be screwed and glued) or on lags. Parquet is glued to the faner, then polished and cycled.
At the end of processing, the parquet should be covered with 3 layers of oil or varnish
Parquet should be well dried. However, the production of such material is quite expensive, which affects its price when selling. The cost of the material is about 30% of all costs that will follow when laying it and subsequent processing.• Artistic parquet is a material made of high -quality wood. Using such material, you can create exclusive drawings that sometimes differ in a very high degree of complexity.• Parquet board. Such material is a three -layer structure. The layers are interconnected by glue, characterized by waterproof qualities.
Since the layers are glued, alternating the longitudinal and transverse directions, the voltage between the layers is compensated, and the floor retains its shape throughout the entire service life. The upper layer is made of valuable wood. The laying of the parquet board is carried out using the “floating floor” technology.
Massive board
This material has large dimensions. Boards, usually downs on all sides. All work with a massive board is carried out as well as with piece parquet. This flooring is a fairly expensive coating. A feature of laying this coating is the requirement of compliance with the temperature regime – the base should not be warm. When operating such a floor covering, the temperature in the room should be approximately 20c.
