Men's Style
  • News
  • Cars
  • Travel
  • Business
  • Sport
  • Tips
  • Jobs
Men's Style – stylish and beautiful portal about life Men's Style – stylish and beautiful portal about life
Men's Style – stylish and beautiful portal about life
  • News
  • Cars
  • Travel
  • Business
  • Sport
  • Tips
  • Jobs

Care for a lacquered wooden door

  • March 21, 2019

The lacquered wooden doors require careful and timely care.

Note that well -soaked in water and a strongly squeezed ordinary rag is the best remedy against dust on the surface of varnished doors.

When caring for the door, the use of various chemicals is not recommended, there is a risk of destroying a lacquered surface.

It must be remembered that caring for a dark lacked surface is much more complicated than behind the door varnished with a light tone. Since with every sunlight hit the dark lacked door, all fat spots and traces will be visible.

And in order to avoid further difficulties, it is necessary to choose the correct color of the varnish for a wooden door or to purchase a ready -made varnished door.

Often, even a well -lacquered door ceases to shine over time and look like new. This occurs due to scratches and dirty spots, from which a simple rag, it will be impossible. And only with the help of a special polish can a varnished surface can be cleaned from stains, and small scratches are hidden. But, unfortunately, even the polish is not able to get rid of deep scratches and serious damage.

It is also important to know that varnished wooden doors are very sensitive to changes in air humidity level. So, at an 80% level of air humidity, the door should be immediately wiped with a dry rag.

Summing up, we note that to extend the service life of your door, you should use special means for the care and cleaning of lacquered wooden surfaces sold in a large assortment.

Be careful when operating wooden varnished doors, do not forget about their property easily scratched.

Subject to all of the above recommendations, your varnished door will last you many more years.

Share
Tweet
Pin it
Share
Share
You May Also Like
View Post

Phishing and cryptocurrency fraud: how to avoid becoming a victim

  • October 25, 2025
View Post

Tulum for ecotourists: advantages and attractions

  • February 26, 2025
View Post

Vacation in Mexico City: what to see and the best attractions

  • February 26, 2025
View Post

Three best places in China for travelers

  • February 26, 2025
View Post

Multi-factor authentication: concept and its features

  • February 26, 2025
View Post

Why it is important to set strong passwords on the Internet

  • February 26, 2025
View Post

What is a reliable internet connection and its advantages

  • February 26, 2025
View Post

Doncic equals LeBron and Westbrook’s record

  • February 26, 2025
Featured Posts
  • Often, those people who live in a private house or have a cottage are faced with the next problem – a blind area. It cracks, crumbles or lags behind the foundation of the house. In addition to technical problems, this still spoils the appearance of the house and reduces its cost if you decide to put it up for sale. Therefore, in our note, we will give you some tips on how to cope with this misfortune and carry out repair of the blind area with your own hands. Actually, the blind area of ​​the foundation serves so that rainwater does not fall from the roof under the foundation of the house during the rain and does not erode it. There are many drainage systems, but the blind area plays far from the last role, being a fairly simple and effective means of protecting the foundation from excessive moisture. If you notice that the blind area is damaged, do not be upset or panic. Such minor repairs are made quite by yourself. First you need to use a hammer and a chisel to remove the damaged part, pulling out broken pieces. Sometimes a blind area can just sneak. In this case, it is necessary to compact the soil in this place. Bled bricks, crushed stone, gravel, sand serve as good material for compaction. After the selected material is poured, you need to pour it with concrete and leve it. When pouring concrete, it is necessary to ensure that it is distributed evenly and coincide with the places of the blind area, which were not repaired. If the blind area did not sag and did not break, but simply went with cracks, it will be enough to close them, without changing the damaged part completely in order to prevent water from entering. For this, a polymer -cement mortar is used. It turns out when mixing PVA glue with cement mortar. Such a solution is very strong and waterproof. After shallowing cracks, it is also necessary to treat with bitumen mastic a place where the wall of the house is connected to the blind area. In the event that the overhaul of the blind area is required, all small damage is connected to the whole repair area and cut down. After that, it is necessary to add a scatter or crushed stone into the resulting pits, flatter and concrete. With this version of the repair, a new layer of concrete should rise above the old level of the blind area. This will provide a reliable and strong connection of the new and old blind. The repair of the blind area is best carried out in spring or summer on a cool day. With the heat and heating of the surface, the slot of the slit can decrease, which will prevent them from high quality
    • January 21, 2025
  • How to choose a bath? Cast iron or acrylic?
    • June 20, 2018
  • The best material for the roof
    • August 9, 2018
  • Construction of a production workshop
    • February 7, 2019
  • How to make a columnar foundation with your own hands
    • June 8, 2018
Recent Posts
  • Phishing and cryptocurrency fraud: how to avoid becoming a victim
    • October 25, 2025
  • Tulum for ecotourists: advantages and attractions
    • February 26, 2025
  • Vacation in Mexico City: what to see and the best attractions
    • February 26, 2025
Men's Style – stylish and beautiful portal about life Men's Style – stylish and beautiful portal about life
  • Men’s Style – newmensstyle.com, 2017-2024. All Right Reserved.

Input your search keywords and press Enter.