Methods of removing wallpaper from the walls to glue new wallpaper if the old ones are not removed, it is impossible. But in order to get rid of the previously glued material, sometimes quite serious efforts are required. To simplify this process in a maximum way, you should understand how it can be carried out. There are many methods of getting rid of wallpaper. But to choose from them sometimes is very difficult.1. Dry wallpaper removal method. Well, if he “works”. But usually still this option cannot be implemented. And even if it gives the result, certain problems still appear. The essence of the dry method is that the wallpaper simply sharsen the spatula and rip off from the wall. If you managed to do this, you have to observe glue on the wall. It also has to be deleted. But now for this they use a wet rag. When multi -layer wallpaper is removed, it is done one at one layer. If it is impossible to remove the material in a dry way, turn to the next.2. Wet method of wallpaper removal. Previously, the wallpaper has to be wetted. To do this, you can use a roller or rag. Water should be slightly warm. Before tearing the canvases from the surface, you should wait until they are saturated. Impregnation lasts a few minutes. This method involves removing not only wallpaper, but also glue. When you need to remove moisture -resistant wallpaper, first resort to the previously described method. That is, the upper layer of the material is removed, then it is wetting the wallpaper, and only after that – the removal of the main layer.3. Removing wallpaper after steaming. This is another method that is used if the wallpaper is glued using very well -granting glue. Wallpaper can be steamed using different “tools”. The most affordable of them is the iron. Naturally, only such an iron that is equipped with a special steamer can be used. There are also special types of tools designed to carry out such work. In any case, their purpose is to make the wallpaper glue soft and supple. Most often, the glue under wallpaper has to be removed in addition after removing the wallpaper. These methods are listed in an increase in efficiency. Therefore, in order not to perform unnecessary labor -cost actions, they should be implemented in this order. If a certain method does not give a result, they proceed to the next
