It is not as easy to apply plaster as it might seem, but if you know the main features and rule of application, this will not be a difficult work. Application of plaster in this way can be carried out both for coating with the applied layer of the base coating, and for the decoration of drywall. In order to perform plaster application, it is necessary to have a mixture itself for finishing plaster, falcon, a cell and a brush to moisturize the surface. If the surface is made of drywall sheets, then the joints between the sheets must be close up first. This is usually done using a reinforcing and ordinary tape. The tape can be glued with the same plaster. When all the gaps are closed, you can start breeding the most plaster mixture. On the packaging, it is always written how to properly breed one or another mixture, so you need to read the instructions and follow its instructions. Когда штукатурная смесь разведена можно начать наносить ее на стену для закрытия зазора косяка как двери межкомнатные. To do this, take a portion of the mixture and apply to the falcon. Now carefully picking up a little mixture on the cell, apply the solution to the wall. It is necessary to apply the mixture evenly so that there are no rough changes in the thickness. After applying all the plaster, you need to go along the wall once again. It is necessary to ensure that the solution does not dry out. At this stage, you do not need to achieve a perfectly flat surface. Give the plaster to dry a little, but it should not dry completely. Moisten Kelm and walk along the wall again. After another half an hour, it is necessary to smooth the plaster again. Thus, aligning not yet completely frozen plaster, this stage can be made much more efficient. This is better than aligning already dried stucco. So it should turn out a flat and smooth surface.
