Pencounton and aerated concrete is quite light building material. Their density is approximately from three hundred and fifty to seven hundred kilograms per square meter. The ease of these materials gives the lightness and walls of the rebuilt house, and even more so the foundation made of this type of material. When using this type of material, labor costs and material will be less than when using other materials for this type of work.
For cellular concrete, a monolithic foundation is usually used, which has a sand -based pillow with a depth of one meter eighty centimeters.
The first masonry of foam blocks is laid on a layer of waterproofing material. This layer is aligned, laying a solution on top of it.
The masonry of the second row is carried out using glue specially designed for this material. Cooking glue is quite simple, for this a dry mixture is poured and stirred with a drill.
Apply glue in strips corresponding to the width.
Penoblocks continue to lay a fresh layer of glue. Starting from the second row, foam blocks are done by dressing. The bearing walls are bandaged with masonry or join using anchors.
Together with the walls, the installation of jumpers are installed. In places of openings, reinforcement is carried out, and then all this is poured with concrete. Monolith belts are also poured with concrete.
The main thing when installing jumpers to pay attention to their location. The depth for the support of the supporting type of jumpers should be at least twenty centimeters on both sides.
The length of the jumper cannot be cut. The jumper should not be less than two hundred millimeters along the length. The use of one or two rows of jumpers of the opening depends on the thickness of the walls. For this type of ceiling, you can also use aerated concrete reinforced jumper.
