When laying porcelain tiles, there is a need to effectively cut it. Without porcelain tile cutter evenly, quickly cut off the desired part cannot. Often trimming is required when going through a communications site. There are several methods of cutting tiles from porcelain tiles. The most popular and effective need to dwell on.
The use of mechanical tile cutter.
In a nutshell, everything happens like this: along the line on the tile, we draw a roller of a cutting tool, and then break the tile. After a long break in the work, mechanical tiles is checked for the effectiveness of their work. Mainly the mechanical video and the system of its consolidation wear out. At the same time, the rib of the roller should maintain its sharpness. And for lubrication of the video, motor oil is used. Pulling the fasteners, a video is fixed, which began to deviate to the sides when moving.
The use of dry cutting in tile cutting.
Dry cutter is a disk for a grinder with a “diamond” spraying. An important point, the direction of rotation of the grinder must be combined with the direction of the disk. Bulgarian is a universal device for many types of work, and the mechanical tile cutter exclusively cuts the tile.
The use of spray in tile cutting.
Or electric tile cutter. Serves for pure and accurate cutting of tiles, as well as mechanical or dry cutting. But cuts an order of magnitude faster. However, the device requires constant cooling of the cutting disk and the cut material. This is necessary to maintain the effectiveness of the cutting process.
The use of hydroabrosive methods of cutting porcelain tiles.
At home, using such a device is not available. After such cutting there are no fragments, cracks, bumps. This is achieved using a jet, under high pressure. The stream consists of a mixture of water and abrasive.
