Dypery for parquet coating is water in large quantities, especially when it comes to its bay. As a result of these circumstances, the boards, like the structure of the rivets, swell, change their shape, which inevitably leads to the repair of the entire parquet. What to do if this happened and how to make a parking lot after the bay?
If they do not intend to tear the floor, then first of all, you should get rid of excess moisture, carefully soaking it. If time is not lost, then a grand repair can be avoided by maintaining your own money, and repairing only the swollen part of the coating. It will also be necessary to update the basis that was used to fix the parquet. Replace parquet boards with new ones stand when they separated from the base.
If the parquet is slightly deformed, but holds tightly on the surface of the floor, their restoration will be enough. After all, you can often observe such a picture: a few days after drying it acquires its former form and takes its place. Shifting the parquet coating again inevitable if deformation is determined even after drying out.
After replacing the site, the parquet cycle is performed. Usually at home use a manual cycle machine. The subsequent stage in the work will be grinding parquet boards, then their coating with varnish. 30% or more damage to the area of the coating, when it is not partially shifted, involves the complete replacement of the parquet. Oddly enough, sometimes with a partial replacement of the parquet to spend more money and effort than with complete restoration.
So, if your parquet is still affected by flooding, then before taking decisive measures, it is necessary to thoroughly calculate the costs of building material and the time required to eliminate the damage caused.